SkyLibre: the Android app for the Parrot Bebop 2

• 🖼 Gallery: fetching the drone’s photos and videos goes on with the screen off, the phone turned or after leaving the Gallery, with a progress notification.
• 🎞 Flight data on a video: you choose your settings at once, then the video is fetched and made on its own. The preview stays visible while you choose.
• 🎤 Voice control: the app no longer closes after several minutes of steady noise (turbines, wind).
• 📒 Flight log: with the phone lying, the flight’s map takes half of the screen.
• 💡 Gallery through the controller: a tip suggests using the drone’s Wi-Fi, about 10 times faster.

• 📱 Drone settings → Flying → « What you see on the screen »: three styles for the flight screen without the headset: Classic, Headset (the same display as in the headset) and Helicopter (the Tiger’s sight, Pro, free in the simulator). Touch each piece of information to show or hide it, with a preview that stays at the top.
• 🎨 Six colours (white, green, cyan, dark blue, pink, red), the size of the info and of the small map, and the background behind the info. Synthetic vision (Pro) is switched on in the same place.
• 🌍 Home screen: « Drone connected over Wi-Fi » is now translated in every language.

• 🪞 Tiger cockpit: both rear-view mirrors show what just went by, about a second ago, reversed like a real mirror. With the real video as in the simulator.
• 🔍 Magnifier in the cockpits: press both triggers at the same time to enlarge the dials, and once more to come back.
• 🎤 The microphone hears « drone » better despite the turbine noise (the phone’s echo and noise cancelling), and the cabin noise goes down while you say the command.
• 🔊 Smoother helicopter noise, without jolts when the drone turns, and a little quieter. By voice: « mute the sound » · « turn the sound on ».
• 🎙 Tiger cockpit: a voice announces the change of seat (« Switching to the gunner’s seat »), and the gunner’s seat downloads by itself with the pilot’s.
• 🕹 Settings → Controller buttons: every button is explained, with both triggers, double presses and both triggers together.
• 🗺 Simulator: a bar shows the preparation of the 3D map of France at launch, and the drone no longer starts inside a house.
• 🎯 Head tracking more reliable at start, and the right trigger fully recentres it.

• 🎨 SkyLibre gets a makeover: the home screen, the drone settings (laid out in cards), the flight screen, Flight Plan, the Gallery, the Flight log, Weather, Find my drone and the other screens are redone in one style, clearer and easier to read.
• 👓 New display in the headset: a compass strip at the top with a mark pointing to you, speed and height on the sides, a small tilting horizon, a battery ring with the minutes left. Each item, the colour and the size can be set in Drone settings → Headset, with a preview.
• ⛰ Synthetic vision (Pro, free trial in the simulator): hill ridges, power lines with their pylons, and trees or buildings taller than the drone on its way are drawn in thin green, at their real place on the video, from the maps (in France). In the headset, and on the screen when the buttons are folded. By voice: “show the relief” · “hide the relief”. Always keep the drone in sight: maps can be a few metres off.
• 🚁 New cockpit: the Tiger helicopter, from a real 360° photo, with its two seats (the pilot in front, the gunner behind, and you fly from both). A helmet sight like the real one, flight screens and map moving with the drone, turbine sound. Change seat by voice (“gunner seat” · “pilot seat”) or with a double press on the left trigger. Pro, free in the simulator.
• 🎬 Video with flight data redone: only the filmed part, a round map (size of your choice), a more modern bottom banner, and a preview before making the video.
• 🌐 360° photo: during the panorama the drone switches to wide-angle photos (then puts your setting back), for a more complete picture.
• 🎤 “drone, video”, “record” or “recording” start the video. In the headset, voice confirmation is safer: 20 seconds to say “confirm”, and the microphone no longer hears the app’s own voice.
• 🛬 Simulator: pushing the throttle stick during landing cancels it, as on the real Bebop 2. And on Android 8 and 9, photos and videos now arrive in the phone’s real gallery. Thank you Olivier!
• 🧰 Repair screen: flying tips (barometer, Wi-Fi gap, lost link, GPS, reset). After a fall or a lost link, the flight you send also carries the drone’s diagnostic files, to better understand what happened.

• 🌐 360° photo reworked after a real flight: the drone now makes a single turn on the spot (8 photos, about 45 seconds) and SkyLibre stitches them with the Bebop 2’s real lens, lining each photo up with its neighbours. Panoramas already flown can be stitched again from the Gallery.
• 🎤 By voice: “take a panorama” or “take a three sixty photo”, then “confirm”. Handy in the headset.
• 👀 Cockpit: a double press on the right trigger goes round four positions. Your head moves the camera and turns the drone; the camera only; “free look” (your head only looks around the cabin, the landscape stays still behind the windscreen); tracking off. By voice: “follow my head”, “stop following my head”, “free look”.
• 🔍 Cockpit: zoom of the drone’s picture in the headset setup (⚙ button, 5th step), and a softer edge around the picture.
• 🎬 Cockpit in real flight: while the drone records, the phone also records what you see in the cockpit (one picture, with the head-up display), in the phone’s gallery (Movies/SkyLibre).

• 🌐 360° photo: after the “360° Panorama” automatic flight, SkyLibre assembles the photos itself into a single 360° photo (Gallery → 🌐 360° photo → Create the 360° photo). You look around with your finger, by moving the phone or in the headset, and Google Photos or Facebook recognise it as a 360° photo. In the simulator, it is created by itself at the end of the flight.
• 🎬 The simulator really films: “take a photo” and “start the video” (screen button, voice or the controller’s buttons) record the 3D view in the phone’s gallery (Movies/SkyLibre and Pictures/SkyLibre), ready to share. In the headset, a single picture; in the cockpit, the cabin’s view with its head-up display.
• 🕹 With the controller plugged into the simulator, its photo and video buttons work too, even in the headset.

• 🚁 Helicopter cockpit: a green head-up display on the windscreen, like in real helicopters (heading, speed, height, climb, battery, distance from the start): the figures can be read without looking down.
• 🚁 The panel stays in front of the pilot and the outside tilts, like the real thing: a little when speeding up or slowing down, nearly level in fast flight, banked in turns.
• 👓 In the cockpit, the headset setup works too (⚙ button and wheel), with a 4th step for the pilot’s head height.
• 🎯 Head tracking: the drone no longer turns towards your look during a return home or a Flight Plan (the camera still follows your head), so they are not interrupted.

• 💥 The simulator crashes like the real thing: touching a house, a tree or the ground (the real terrain) cuts the motors, and a button puts the drone back on its take-off point. No more flying through houses or into the ground.
• 🏔 On modest devices (little memory, old tablets), the 3D pilot view loads faster: SkyLibre picks a lighter scenery by itself (less sharp photos, trees and houses less far).
• 🧾 The log records how long each step of loading the 3D view takes and the device’s memory, to find what slows it down.

• 🚁 New EC135 helicopter cockpit for the headset (SkyLibre Pro, free in the simulator), alongside the EC130: the pilot sits on the right, dials on both sides, a drift cross, three screens (satellite map, flight data, link) and the rotor that starts turning at take-off and stops on landing. It downloads once (Settings → Headset) and then stays on the phone.
• 🎮 With several cockpits turned on, the controller’s left trigger cycles: normal screen → headset → EC130 → EC135 → back to the screen.
• 🗺 Safer Flight Plan: if the drone lands during a flight path, even with the controller’s button, SkyLibre stops the flight path so that the motors really stop.
• 🕹 Mode 1 on old SkyController 2 units: if the controller does not change mode, SkyLibre can apply the stick mode itself (Drone settings, box “The mode does nothing on your controller?”). Off by default.
• 📶 SkyController 1 (trial): SkyLibre looks harder for the controller on its Wi-Fi and writes what it sees in the log, to help us get it working.
• 🧾 More complete log: if the app is force-closed or freezes during a flight, what happened is no longer lost, and the next log says why Android closed it. It helps us fix things faster.

• 🗺 The simulator now shows the 3D map of France, with the real terrain, houses, trees, rivers and the sea: the houses have real walls (stone, render, brick, metal cladding on sheds) and real roofs, each in the material picked from the aerial photo (tile, slate, zinc, sheet metal, the pale membrane of supermarkets…). The trees are real trees according to their species and size, no longer green blobs.
• 🌊 Rivers, lakes and the sea (up to near the coasts) reflect the sky and the sun, with small waves that move gently.
• 🚁 In the helicopter, the cabin tilts like the drone when it moves forward or turns, while the scenery stays level; the artificial horizon and the ceiling compass move too, and the camera angle is shown on the horizon. The controller’s left trigger switches from the normal screen to the headset, then to the helicopter, then back to the normal screen. The sound of a real helicopter cabin rises at take-off and beats harder when the drone works hard (it can be turned off in the settings).
• 👓 The immersive mode (headset) reworked, thanks to Olivier’s feedback: the information is tidied into thin columns on the sides so it no longer blocks the view, an arrow shows where the pilot is (with the distance) when you have turned a lot, and the camera angle is shown on the right edge.
• ⌂ The Return Home now ends gently: near the ground, the descent slows down so the drone no longer lands too abruptly.
• ⚙ The drone settings are organised into 6 tabs (Piloting, Safety, Headset, Map, Voice, General), and the long explanations unfold with “ⓘ Learn more”.

• 🚁 New helicopter cockpit in the FPV headset (Pro, free in the simulator): you sit in the cabin of a real helicopter, with the drone’s video in the windscreen. With head tracking, you look at the doors, the roof and the dashboard: the gauges move with the drone (speed, height, battery, distance, heading and return), the map and satellites show on the screens, and the sun lights the cabin according to the time of day. Turn it on in Drone settings → FPV glasses.
• 👓 In the headset, alerts (obstacle, power line…) no longer hide the view: a thin glowing strip at the top of the picture, and the voice still warns you.

• 🏔 New « pilot view » in the simulator: instead of the map, what the drone’s camera would see, in 3D, with the real houses, trees, terrain and power lines (IGN data, in France). A button switches between the pilot view and the satellite map. With the FPV headset, it’s the pilot view in each eye, like the video in real flight, with head tracking. The first time it needs internet (about 15 MB), then everything is kept on the phone.
• ⌂ In the simulator, the controller’s Home button works like the real thing: direct return to the take-off point, and a second press stops the return.

• ⚡ Power lines on the map (France): RTE high voltage in red, medium voltage in orange, low voltage in yellow (Enedis and local distributors). They are downloaded around the take-off point when the phone has internet, then stay on the phone so you can fly without a network.
• 🗣 In flight, the Butler says “Watch out, power line ahead!” if the drone is heading towards a line while flying low and would reach it in about 5 seconds, once per line. Idea by Nemesio (Drones Company), thanks to him!

• ✨ Flight Plan: a « What do you want to do? » assistant guides you step by step: filmed walk, around a building, straight line, map of a piece of land or 3D scan.
• 📍 Simple settings: the height is explained (above the houses, the trees…) and every button says what it does. « ⚙ More settings » to go further.
• ▦ Land survey: draw the area on the map, stretch it, turn it. The number of photos, the time and the batteries show at once.
• ▶ Preview: the flight is animated on the map before you go, with its time and the number of batteries.
• ✅ « Ready to take off? »: a clear list before starting, with a button to fix each red point.
• 🎥 Cameraman: the app itself keeps the target in the middle of the picture, even very close or low. Follow Me asks the drone to keep you in the middle of the picture.
• 🛟 Drone on the ground lifted by hand: no more false « motors cut » alert. The Rocket no longer lingers at the top.

• 👣 Follow Me: the phone’s position didn’t reach the drone (« Look at me », « Follow me »…). It’s fixed. Thanks to the tester who sent their log after their flight!
• 🥽 FPV goggles: the camera follows your head movements again. The ⏹ Stop button of an automatic flight also stops the drone more firmly.

• 🏔 Flight Plan: the route is checked live while you make it. Where the drone would pass too close to the ground, a tree or a building, the path turns red on the map, and a red banner says where: tap it to see it in 3D and fix it. The « Not ready yet » window reminds you too.
• 🏔 Flight Plan, 3D obstacle view: it handles like a map. One finger moves it, two fingers zoom where you want, turn it and tilt it, a double tap zooms in. The « 🎯 Show the red spot » button goes straight to the place that is too low, circled in red, and « ⟲ Whole view » goes back to the whole route.
• ↩ On the Flight Plan map, the dashed line is the way back to the starting point, flown by the drone on its own at the end: it is now written on it.

• 🏔 Flight Plan (Pro): before take-off, the « Launch the Flight Plan? » window shows the route in 3D over the relief, trees and buildings (in France), with a clear verdict. If it passes too close, a button raises the point(s) concerned: you choose. The new « 🏔 Obstacles » button does the same check while you make the route.
• 🕹 On-screen sticks: a stick can no longer stay stuck (the drone that kept turning), and Android no longer takes the finger away near the screen edge (the stick that went back to the centre). The sticks are a little higher.
• ↩ During a Circle, a Spiral or a Flight Plan, the flight screen shows « ↩ after the route » instead of « preparing… ».
• 🎩 Butler voice: « Arrived at the starting point » and « Already at the starting point » are now said in its voice.
• 📶 If you send a report without internet (on the drone’s Wi-Fi for example), SkyLibre tells you it will leave later.

• ⭕ Circle and Spiral: the drone turns continuously, without jolts. The circle is made of many more points, the drone starts and stops gently, and in Cinema or Slow mode it turns more slowly (a circle with a 7 m radius takes about 30 seconds).
• 🗺 Flight Plan: the point to look at is given to the drone only once, for a steadier rotation. During a route, the rotation speed of your flight mode is no longer changed.
• 🎥 If the drone is already filming, an automatic flight no longer touches the video: it keeps recording without a break.
• 🧭 The map on the flight screen is round and smaller, like in FreeFlight: it hides less of the video. Tap it to open it full screen.

• ⛰ In France, SkyLibre now uses the IGN terrain, accurate to the metre, with the height of the trees and buildings. The data downloads the first time, then updates itself.
• 🌲 “Obstacle ahead” alert: in flight, SkyLibre looks 3 seconds ahead of the drone. If it is about to pass too close to a tree, a building or a large metal pylon, it shows and says “Watch out, obstacle ahead, climb!”. Nothing to set up. Free, in France.
• 🗺 Flight Plan (Pro): tap “profile” to see your path from the side, the ground in brown and the trees in dark green. Where the drone passes too close, it turns red, with a message saying which point to raise.
• 🏠 Return to the take-off point (⌂ Home button, voice command or low battery): the drone first climbs above the trees on its way, then comes back. Free.
• 📒 Flight log: open a flight to see, as a chart, the real height above the ground and the trees, and the moment the drone came closest to them. Free.
• 🎬 3D replay and video with flight data: the real hills and valleys show under the drone’s path.

• 🎥 Video with flight data (Pro): in the Gallery, tap a drone video, then “Add the flight data”. Tick what you want to see: speed, height, distance, battery, date, GPS position. SkyLibre makes a new video, the original stays untouched.
• 🗺 On that video you can also add the 3D path with the height, over the satellite photo or the street map, with a solid or see-through background.
• 🎬 3D replay (Pro): in the Flight log, open a flight and tap “🎬 3D”. The drone flies its path again in 3D; turn and zoom with your fingers.
• ✨ “What’s new” screen: it shows once after each update, then stays on the home screen (“✨ What’s new”).

• 🌍 8 languages: French, English, German, Spanish, Italian, Portuguese, Dutch and Polish.
• 🎙 Voice commands in your language (German, Spanish, Italian, Dutch, Polish).
• 🥽 Head tracking in FPV goggles mode (Pro): the drone’s camera follows your gaze.
• 🔋 Automatic return to the take-off point at 20% battery, set by default.

• 🎮 Flying with or without the SkyController 2: live video, HUD, 4 flight modes.
• 🗺 Flight Plan on the satellite map, route templates, 3D scan, surveys, routes over several batteries (Pro).
• ✨ Automatic flights, Follow Me and Cameraman (Pro).
• 🛡 Pre-flight check, drone zones, clear help when something breaks.
• 🟣 Simulator, Gallery, Flight log and weather.
• 🎙 Voice alerts and voice commands without internet.
• 📷 Straighten fisheye photos.

Version 1.26: More pleasant cockpits (November 13, 2026)

• 🔍 In the cockpits, the controller’s left wheel zooms the pilot’s view: one way closer, the other way further, to read the dials.
• 🌳 Synthetic vision: the top of the trees and buildings is drawn all around the drone, from 5 to 100 m, with the height of the 5 nearest ones that are higher than it.
• 🚁 Cockpits: the view follows the head without jolts, and the edge of the drone’s picture melts gently into the sky.
• 📍 The pilot’s distance is no longer wrong by several kilometres, and the screen no longer turns green when leaving the headset.

Version 1.25: Safer in the headset (November 13, 2026)

• ⛰ Synthetic vision: only power lines within 50 m of the drone are drawn, with thin lines, so the app no longer closes when lines come into view in the headset.
• 🎬 The cockpit video filmed on the phone now has the helicopter’s sound, and a message tells you when it is being prepared, then when it is in the Gallery.
• 👓 Drone settings: the headset settings are back in the Headset tab.

Version 1.21: More responsive head tracking, a handier simulator (November 12, 2026)

• 🎯 Your head turns the drone from 30° (instead of 43°), continuously as long as you keep your head turned, and faster when you turn it further. New setting “Head turning speed”: slow, medium or fast.
• 🟣 The simulator starts where you are: SkyLibre waits for a recent position from the phone instead of taking an old one.
• ⟲ Simulator: a “Back to start” button when the drone is on the ground, and “come back home” by voice also brings it back to the take-off point. After a crash, “Send this flight?” waits until the crash window is closed.

Version 1.14: Flight modes by voice (November 11, 2026)

• 🎤 Voice commands: the four flight modes by voice (“slow mode”, “cinema mode”, “normal mode”, “sport mode”), sport mode after “confirm”.
• 👓 In the headset, the list of commands (“help”) fits in the picture and stays longer, and the “confirm or cancel” question shows in each eye.

Version 1.12: Trees that no longer jump (November 11, 2026)

• 🌳 3D pilot view: when you get close to a tree or go round it, it moves smoothly from one view to the next instead of changing all at once.
• 💥 Simulator: after a crash, only the « Crash » window shows (no more « Motor blocked » and « Emergency » help from the real drone), and it says the drone hit something.

Version 1.11: Simulator voices and the SkyController 1 (November 11, 2026)

• 🔊 Simulator: new voices for the crash (seven versions, with a touch of humour) and for being put back on the starting point.
• 🕹 SkyController 1 without the drone: SkyLibre listens to the controller for two minutes and writes in the log what it sends, to prepare using it with the simulator.
• 📶 After the simulator, SkyLibre no longer looks for a « Bebop2-SIMULATEUR » Wi-Fi that does not exist: connecting to the real drone happens without waiting.
• 🎯 Flight screen: with the right-hand buttons folded, the heading bar stays in the middle of the screen.

Version 1.10: Faster 3D and the distance beyond 500 m (November 11, 2026)

• 🔊 Beyond 500 m, the voice announces the distance every 100 m (before, it stopped at 500 m).
• 🌳 3D pilot view: trees no longer change size or look as you get closer.
• ⚡ The 3D pilot view loads faster: photos, houses, rivers and terrain download at the same time, and the scenery starts getting ready as soon as the simulator starts.

Version 1.09: The real height above the ground (November 11, 2026)

• ⛰ Height above the ground: over a slope or a hill, a small « ⛰ » value shows under the height, from the IGN terrain (France). The drone itself counts its height from the take-off point. Nothing more on screen over flat land.

Version 1.02: The simulator with the controller (November 10, 2026)

• 🕹 The simulator now works with the SkyController 2 plugged in (drone off): its sticks fly the pretend drone, with the Take-off/Land and Home buttons. The triggers and the ⚙ button work as in real flight: you can practise with the FPV headset and head tracking.

Version 1.01: Your head turns the drone (November 10, 2026)

• 🔄 New option with head tracking (Drone settings, off at first): when you turn your head further than the camera (35°), the drone slowly turns towards where you look, like in a simulator. Look ahead to stop it; a stick takes over right away.

Version 1.00: New Butler phrases (November 10, 2026)

• 🗣 The Butler now has its real voice for the new phrases: head tracking (on and off), “Watch out, power line ahead!”, arriving home and “already home”, with several ways of saying it picked at random.

Version 0.98: Head tracking from the controller (November 9, 2026)

• 🎯 FPV glasses: two quick presses on the right trigger turn head tracking on or off, without taking the headset off (one press recentres). Also by voice: “Drone, turn head tracking on” or “turn head tracking off”.
• ☀ FPV glasses: the right wheel really changes the brightness (steps 3 times stronger), and the value shows in each eye.

Version 0.96: Headset setup better explained (November 9, 2026)

• 👓 FPV glasses: the controller setup explains itself in the headset. When “Try it in the headset” opens, the steps show in each eye; while setting up, the current step is written under the cross (“Step 1/3 · Picture size”, what the right wheel does, and the ⚙ (gear) button to go on).

Version 0.95: Stick mode: mode 1 or mode 2 (November 9, 2026)

• 🕹 Drone settings → “Stick mode”: mode 2 (the most common) or mode 1 (left stick to go forward and turn, right stick to go up and sideways). It applies to the sticks on the screen, the simulator and the SkyController 2, which then keeps the setting. An idea from Olivier, thank you!

Version 0.94: Height of the pictures in the headset (November 9, 2026)

• 👓 FPV glasses: a third press on Gear, and the right wheel moves the pictures up or down, for phones that are not in the middle of the headset. Also in Drone settings → FPV glasses.
• 🔆 “Try it in the headset”: the screen no longer goes to sleep while setting up with the controller.

Version 0.92: Set the headset up with the controller (November 9, 2026)

• 🕹 FPV glasses, phone in the headset: the right trigger recentres the head tracking, and Gear + right wheel set the size then the gap of the pictures, in flight as in “Try it in the headset” (controller plugged in, even with the drone off). The rest of the time, the wheel sets the brightness, and its value shows in each eye.

Version 0.91: FPV glasses better set up (November 8, 2026)

• 👓 FPV glasses: the two pictures are placed in front of the headset’s lenses, smaller, whatever the size of the phone. The flight info (battery, height, speed, distance, satellites) and the alerts show in each eye, and the “Hand launch” button disappears. Drone settings → FPV glasses → “👓 Try it in the headset”: the volume buttons set the size.
• 📤 After a flight, SkyLibre offers to send its log: a single button, and never without your consent. No more than once every 20 minutes, and “Don’t ask again” if you prefer (Drone settings, “Flight log”, to turn it back on).
• 🛠 Android 8, 9 and 10: the flight screen closed as soon as it opened, and on Android 8 and 9 the 📶 Wi-Fi button closed the app if the phone was not already on the drone’s Wi-Fi (it now opens the Wi-Fi settings). Fixed.
• 🔇 Drone on the ground, tilted or lifted by hand to switch it off: no more “Emergency! Motors cut” voice.

Version 0.90: Fix for Android 8 and 9 (November 8, 2026)

• 🛠 Android 8 and 9: the app closed suddenly when opening the Flight Plan (and sometimes the flight screen, « Find my drone » or Follow Me). Fixed. Thanks to the tester who sent their log!

Version 0.89: First SkyController (trial) (November 8, 2026)

• 🕹 First SkyController (no « 2 »): connect the phone to its « SkyController_… » Wi-Fi, then tap « Wi-Fi »: SkyLibre goes through the controller to fly the drone. It is a trial, thanks to the tester who is helping us! Flight Plan routes still use the drone’s direct Wi-Fi.
• 💬 Clearer messages when the controller or the drone’s Wi-Fi is not found.

Version 0.85: Clean flight screen (November 6, 2026)

• 🧭 Small map of the flight screen: you can hide it (Drone settings, « Map »). A small 🗺 button replaces it to open the big map. Handy to film or share your screen without showing where you are.
• ▶ The buttons at the top right fold away with one touch on the small arrow, for a clear screen; ◀ brings them back. LAND and the warnings always stay, and SkyLibre remembers it for the next flight.

Version 0.82: Map that slides again, landing announced on time (November 5, 2026)

• 🗺 Flight Plan: the map can be dragged with your finger again while the drone is connected (it kept jumping back to the drone). Same for the big map on the flight screen.
• 🛬 « Starting the landing » is said as soon as the drone starts to come down, no longer after another sentence. SkyLibre no longer says « Route finished » when landing if no route was running.

Version 0.80: Fixes after the test flights (November 5, 2026)

• 🏠 Return to the take-off point: once there, SkyLibre says “Back at the take-off point, tap Land” (the Bebop 2 never lands by itself after a return). If the drone is already there, the ⌂ button no longer makes it climb for nothing.
• ⛰ “The ground rises ahead” alert: only when the ground really rises in front of the drone (no longer when flying low over a flat field), and once per obstacle, unless the drone gets closer still. The “Weak signal” banner no longer blinks.
• 🗺 Flight Plan: the climb before the route is done at normal speed, even in Cinema mode, and the flight screen shows “Climbing to 60 m before the route” with the time left.
• 🎥 Flight Plan: a “Film the route” box in the “Launch the Flight Plan?” window, ticked by default. After an automatic flight (Circle, Spiral…), the drone’s video carries on if it was already running.
• ⭕ Automatic flights: “getting into position…” shows while the drone reaches the start of the circle or the spiral.
• 📍 The distance to the pilot (👤) no longer shows a wrong value of several kilometres when the controller sends an old GPS position.
• 📶 Wi-Fi: if the phone is already on the drone’s Wi-Fi, SkyLibre no longer asks Android again (no more stuck “Searching for device” panel). If it stays on screen, SkyLibre cancels it after 20 seconds and says what to do.
• 🌍 The Flight Plan profile and the Flight log date are translated into every language.

Version 0.78: Butler voice (November 4, 2026)

• 🎩 The special voice is now called “Butler” (Pro). To pick it: Drone settings, “Voice”. The wake word stays “Drone” (for example “Drone, take a photo”) and you can change it in the same place, “Wake word”.

Version 0.77: What the obstacle alert cannot see (November 4, 2026)

• ℹ️ Drone settings, under the automatic return: a text explains what the “obstacle ahead” alert sees (trees, buildings, large metal pylons, terrain) and what it does not see (power lines, cables, thin poles, antennas, cranes, anything that has changed since the IGN surveys).

Version 0.76: Butler voice completed (November 4, 2026)

• 🎙 Butler voice: the new alerts are recorded (“obstacle ahead”, “the ground rises ahead”, “too low to come home”), and numbers are said exactly: “battery 73%”, “height 117 m”.

Version 0.75: Small fixes (November 4, 2026)

• 🔁 The icon of the Boomerang automatic flight (✨ Auto button) did not show properly on some phones: fixed.

Version 0.74: Weak signal: warned in time (November 4, 2026)

• 📶 Weak signal and drone too low: SkyLibre says for example “Climb to 35 m”. If the link drops, the drone flies home on its own in a straight line: at that height, it passes above the known trees and buildings. It is only advice: SkyLibre never takes the controls. Free, in France.

Version 0.67: Flight screen and terrain (November 3, 2026)

• 🕹 The right-hand buttons on 2 rows: they no longer hide the stick.
• 👁 Flight Plan: SkyLibre warns you when a hill hides the drone from you.